What is Air-Assisted Electrostatic Spraying

At the tip of the ESS MaxChargeTM nozzle is a tiny electrode which applies an electrical charge to the spray. This electrical charging causes a natural force of attraction between the spray droplets and target surface, similar to the attraction between items of clothing created by the tumbling of a clothes dryer. The charge on the droplets is small, but the force pulling the spray towards the target is up to 75 times greater than the force of gravity. Droplets literally reverse direction and move upwards, against gravity, when passing a target surface. This remarkable phenomenon by which the spray coats the undersides and the backsides of the spray target is known as electrostatic “wraparound.” In practical terms, this means that spray reaches the underside, the back side, and the nooks or crevasses of the target surface.

How does the Penetrexx technology work?

The active ingredient in the Penetrexx antimicrobial forms a colorless, odorless, positively charged, polymer, which chemically bonds to the treated surface, think of it as a layer of electrically charged swords. When a microorganism comes in contact with the treated surface, the “quat” or “sword” puncture the cell membrane and the electrical charge shocks the cell. Since nothing is transferred to the now dead cell, the antimicrobial doesn’t lose strength and the sword is ready for the next cell to contact it. Normal cleaning of treated surfaces is necessary to prevent the buildup of dirt, dead microbes, etc. which could cover the “swords”, prohibiting it from killing microorganisms.

What is the difference between Pentrexx and other antimicrobials?

Conventional products are absorbed into living cells and kill by way of poisoning the organism. They are designed to act quickly and dissipate quickly to avoid adverse effects to humans and animals due to their toxic ingredients. Penetrexx technology provides an effective initial microbial kill when applied, like the conventional methods but it also provides long-term control of growth on treated surfaces…that basically lasts for the life of that surface. The surface itself is modified to make it actively antimicrobial for the normal life of the substrate onto which it is applied.

What kind of preparation is needed for treatment?

Clearstream’s MEDI DEFENSE line has a compatible surface preparation and cleaning product (mPerial) that is also a disinfectant. First clean high-touch surfaces with mPerial and a microfiber towel to remove visible soil and organic matter.  Penetrexx when used in tandem with mPerial, creates the perfect combination of cleaner and antimicrobial protection.

What are Aquaox Solutions?

AQUAOX™ solutions are Electrochemical Activated (ECA) water solutions that provide no-residue cleaning and hospital-level disinfection.  Aquaox 112 Cleaner is a non-hazardous chlorine-free liquid formulation that does not produce fumes or contains hazardous “butyl” solvents or other potentially dangerous substances such as phosphates or ammonia. It is a 200 ppm Sodium Hydroxide solution with a minimum pH of 11 and is an effective cleaning and degreasing agent that is used in medical, institutional, industrial and commercial applications.

The Aquaox 275 and 525 Disinfectants are produced at a near neutral pH where the predominant antimicrobial agent is Hypochlorous Acid (HOCl), an efficient and efficacious species of chlorine that kills bacteria, fungi, molds, viruses, and spores without dangerous chemicals.

What is the best way to clean and disinfect with the Aquaox system?

The Aquaox system is a simple 2-step process, where we first clean high contact surfaces with Aquaox 112 Cleaner and a microfiber towels to remove visible soil and organic matter.  Then we apply Aquaox 275 or 525 disinfectant using an electrostatic sprayer for full room disinfection.

How does The UV Box work?

Plug the unit into a 110 volt standard outlet, turn the power switch on and a green light illuminates.  Turn the knob and open the door and place the item to be decontaminated into the box.  Close and lock the door, press the red button (lights up during the 55 second cycle). When the red light goes off, decontamination is done.  You might notice a slight ozone smell when the cycle is complete.

Can I put anything in The UV Box?

Yes, it will not harm electronic devices such as smartphones and iPad tablets.  Personal items such as employee badges or other small items can also go in the box.